Category Archives: Domotics

Connecting the AC IR Driver to the Ecobee 3

In the previous post we have created the IR Controller for the Samsung AC AR7000, so now it’s time to connect our Ecobee3 (modded for EU 220V Standard) to our Samsung AC.

Of course we need to add a new Relays to our electric panel and connect it to the Y1 pin in the ECOBEE plug panel.

Follow next schematic that is an improvement of first installation.


Connecting the Ecobee to the IR controller now is really simple!

Remove just the switch (keep the pull-down resistor) and connect instead the two pins AC_IR_DRIVER.

After that go to the Ecobee settings

Select Main Menu > Settings > Installation Settings > Equipment > Wiring

and configure manually to add Y1 and Y2 pin usage.

Test it by Main Menu > Settings > Installation Settings > Equipment > AC.

The thermostat will close the circuit every time he want to cool the apartment, closing the circuit is exactly like pushing the switch button on the IR Controller.

It will trigger a IR ON signal.

Once the thermostat want to stop, it will open the circuit (like releasing the button) and a IR OFF signal will be triggered.

(Of course you have to put your IR led in the AC direction or it will not work)

Let me know if it works also for you.

See you to the next post.

Arduino IR Samsung AR7000M A/C

I know… I’ve already one project to control my AC by my thermostat, but Samsung smart is not so open protocol and the work is going slowly but summer is already here!!!!

So I’ve already setup my thermostat to control my AC by IR, but let’s proceed by steps and create the hardware to communicate to turn on and off the AC.


First of all take:

Connect the IR led to the transistor to the Pin 3 of the Arduino following that scheme.


Here the 2N2222 PinOut:


Now connect the switch


The switch is temporary and will be substituted by the Ecobee contacts but for testing purposes is rather easy to implement and proof it’s working.


Upload next code to make it working:
[pastebin id=”3dgFbw8k”]

Test your new controller if drive correctly your AC.

Next step is to connect it to the Ecobee thermostat.
See you at next post.

Ecobee and 220v European Heater

Not so many good smart thermostat are available (compatible) in Europe… Tado or netatmo are the only two that works with our environments natively, but what if I want to use a top level one?

The answer is simple and in the next lines we will figure out how to adapt the 24V AC US Thermostat Standard to 230V European Standard.


List of components:

Powering Ecobee3

Mounted Ecobee3

To test the Relay you must go to Main Menu > Settings > Installation Settings > Equipment > Heat Pump

Then Turn On and Off and should listen the relay “Clack!!” sound and the Heater should turn on/off.

You can now configure your ecobee3 as you prefer following the manual.

Enjoy 🙂

Home Bridge & Samsung AC

!!! Still not completed!!!

Install Node.JS

sudo apt-get update sudo apt-get upgrade
node —version
curl -sL | sudo bash -
sudo apt-get install nodejs

Install NPM

npm install npm -g
sudo npm install update
sudo npm -g install node-expat

Install Samsung Air Conditioner

git clone

edit package.json and change xml2json version:

 , "xml2json"     : "0.9.1"
sudo npm install node-samsung-airconditioner



└─┬ samsung-airconditioner@0.2.2
└─┬ xml2json@0.9.1
├── hoek@2.16.3
├─┬ joi@6.10.1
│ ├── isemail@1.2.0
│ ├── moment@2.14.1
│ └── topo@1.1.0
└─┬ node-expat@2.3.15
└── nan@2.4.0

After that you need to wait I writ the homebridge-samsung plugin…